Installation And Start-Up; General Guidelines; Standard Mounting - Honeywell Satellite XT Manual To Operations

2.1

General Guidelines

Please consider the aspects indicated below before locating the instrument.
This section explains installation and initial start-up procedures.
The property of the target gas (lighter or heavier than air) must be considered. The
instrument should be mounted as close to the monitoring location as possible and should
be easily accessible for operation and maintenance. For narrow monitoring locations or
2.1 General Guidelines
duct mounting a sensor extension with a standard length of 2m (6 feet) is available as an
option.
Please consider the aspects indicated below before locating the instrument.
The optimum position to mount the instrument is in an upright position on a flat surface.
The property of the target gas (lighter or heavier than air) must be considered.
The instrument should be mounted as close to the monitoring location as possible and should be easily
If the instrument is used for ambient air monitoring, ensure that the sensor is facing
accessible for operation and maintenance. For narrow monitoring locations or duct mounting a sensor
downwards. For personal monitoring applications the instrument should be mounted at
extension with a standard length of 2m (6 feet) is available as an option.
head level.
The optimum position to mount the instrument is in an upright position on a flat surface. If the instrument
is used for ambient air monitoring, ensure that the sensor is facing downwards. For personal monitoring
Ensure that the area immediately surrounding the instrument is free from objects that
applications the instrument should be mounted at head level.
might hinder free flow of air. The instrument should be installed away from any possible
Ensure that the area immediately surrounding the instrument is free from objects that might hinder free liquid sources, extreme dust and dirt sources and should be protected against rain and
flow of air. The instrument should be installed away from any possible liquid sources, extreme dust and
sunlight. An instrument version protection class IP 65 is available for outdoor applications.
dirt sources and should be protected against rain and sunlight. An instrument version protection class
IP 65 is available for outdoor applications.
A junction box is recommended to connect the instrument to external control systems.
A junction box is recommended to connect the instrument to external control systems. A distance of 2 m
A distance of 2 m (6 feet) must not be exceeded.
(6 feet) must not be exceeded.
Regarding the power requirements and operating conditions, please follow the
Regarding the power requirements and operating conditions, please follow the specifications indicated in
specifications indicated in Section 1, Technical Specifications, for wiring instructions refer
Section 1, Technical Specifications, for wiring instructions refer to Section 2, Wiring.
to Section 2, Wiring.
The sensors should be stored in a cool, dry place when not in use.
The sensors should be stored in a cool, dry place when not in use.
2.2

Standard Mounting

2.2 Standard Mounting
The instrument is designed for DIN–rail mounting. The mounting rail standard shipped with each
The instrument is designed for DIN–rail mounting. The mounting rail standard shipped with
instrument is used for wall mounting. Mount the DIN–rail to a wall and fasten the instrument with the
each instrument is used for wall mounting. Mount the DIN–rail to a wall and fasten the
sensor downwards and the display facing the front.
instrument with the sensor downwards and the display facing the front.
Attach the wires to the junction box according to the wiring diagram provided in the course of this
Attach the wires to the junction box according to the wiring diagram provided in the course
section.
of this section.
Mounting rail standard (P/N 9602.0050.10.03)
Mounting rail standard (P/N 9602.0050.10.03)
Satellite XT R Version
Satellite XT R Version
This section explains installation and initial start-up procedures.
90,0
Installation and Start-Up - Section 2
Installation and Start-Up - Section 2
7,5
2 - 1
2-1