Panasonic DMP-BD50EG Service Manual page 28

9.2.3. Pulley gear, Belt
1. Perform the step "9.2.2. Tray".
2. Push the post to the direction of arrow by using the slot-
ted screwdriver.
3. Remove the Pulley gear and Belt.
9.2.4. Slide cam
1. Perform the step "9.2.3. Pulley gear, Belt".
2. Remove the Sheet.
3. Open the connector lock, and disconnect the 4 FFCs.
4. Remove the 2 Screws (B) and the Drive P.C.B.
Caution:
Though the Drive P.C.B. is not supplied as replace-
ment parts, it must be removed for after disassem-
bling.
5. Open the connector lock, and disconnect the FFC.
6. Remove the 2 Screws (C), and remove the Traverse base
ass'y with spreading the 2 hooks to the direction of
arrows.
28