Panasonic DMP-BD50EG Service Manual page 20

Mode name
Display the Error History Display the Error History stored on the unit.
* If the current date or the date when the error
occurred is wrong, correct judgement may not
be made.
Tray OPEN/CLOSE Test The BD Drive tray is opened and closed
repeatedly.
Delete the Laser Used Laser used time stored in the memory of the
Time unit is deleted.
Delete the Last Drive Delete the Last Drive Error information stored
Error on the BD Drive.
Delete the Error History Delete Error History information stored on the
unit.
Error code initialization Initialization of the last error code held by
timer (Write in F00)
Initialize Service Last Drive Error, Error history and Error
Codes stored on the unit are initialized to fac-
tory setting.
Finishing service mode Release Service Mode.
Item
Description
FL display
When the drive malfunction was
detected within 4 weeks ago. (*)
When the drive malfunction was
detected more than 4 weeks ago or
Drive last error data does not exist.
The Error History is not Data for BD
Drive.
The Error History is not Data.
* is number of open/close cycle
times.
Display in STOP (SS) mode.
20
Key operation
(Remote controller key)
Press [6] [5] in service mode.
Press [9] [1] in service mode
*When releasing this mode, press
the [POWER] button of Remote
Controller more than 10 seconds.
Press [9] [5] in service mode.
Press [9] [6] in service mode.
Press [9] [7] in service mode.
Press [9] [8] in service mode.
Press [9] [9] in service mode.
Press power button on the front
panel or Remote controller in ser-
vice mode.