Panasonic DMP-BD50EG Service Manual page 12

Error Code Diagnosis contents
UNSUP- Unsupported disc error
PORT
NO READ Disc read error
HARD Drive error
ERR
IR ERR IR communication error
SELF Restoration operation
CHECK
PLEASE Unit is in termination process
WAIT
UNFOR- Unformatted disc error
MAT
No PLAY When there is a viewing restric-
tion on a BD-Video or DVD-
Video.
7.1.2. Special Modes Setting
Mode name
TEST Mode *All the main unit's parameters are initialized.
Rating password The audiovisual level setting password is ini-
tialized to
Service Mode Setting every kind of modes for servicing.
*Details are described in
at a
BD-ROM history cleaning < Persistent Storage> of BD-ROM standard is
cleaned.
Screen display: [The player's history data has
been cleared] is displayed for five seconds.
Forced disc eject Removing a disc that cannot be ejected.
The tray will open and unit will shift to P-off
mode.
While Demonstration Lock is being set, this
Forced disc eject function is not accepted.
*An unsupported format disc was played,
although the drive starts normally.
*The data format is not supported, although
the media type is supported.
*Exceptionally in case of the disc is dirty.
*A disc is flawed or dirty.
*A poor quality failed to start.
*The track information could not be read.
The drive detected a hard error.
[IR ERR] is displayed when communication
between Timer microprocessor and IR micro-
processor fails.
Since the power cord fell out during a power
failure or operation, it is under restoration
operation.
*It will OK, if a display disappears automati-
cally. If a display does not disappear, there is
the possibility that defective Digital P.C.B. /
BD drive.
Unit is in termination process now.
BYE is displayed and power will be turned off.
You have inserted an unformatted DVD-RAM
or DVD-RW that is unformatted or recorded
on other equipment.
Rating password is set.
Item
Description
Level 8.
7.1.3. Service Mode
glance.
Description
FL display
Same display as before execution.
The display before
leaves.
12
Monitor Display Automatic FL display
This disc is
incompatible.
Display for 5 seconds.
Cannot read.
Please check the
disc.
BD drive error. Display for 5 seconds.
No display
No display
No display
The disc is not
formatted properly.
No display
Press [STOP], [SKIP FWD] and
[OPEN/CLOSE]
neously for five seconds when
power is off.
Open the tray, and press [SKIP
REV] and [PLAY] simultaneously for
5 seconds.
When the power is off, press [SKIP
FWD],
[PAUSE] keys simultaneously for 5
seconds.
When disc is not in tray. press
[STOP] and [POWER] keys simulta-
neously for 5 seconds.
execution When the power is off, press [SKIP
FWD] and [PAUSE] keys simulta-
neously for 5 seconds.
Key operation
Front Key
keys simulta-
[OPEN/CLOSE] and