3. In this screen the highlight part is to configure & activate VRRP. Be sure to
check Active to run VRRP features and Preempt Mode to let the switch choose
the master. The Virtual Router ID, Primary & Secondary Virtual IP should have
the same configure with the master & backup switch. For more specific
information, please kindly use HELP icon.
Figure 3, IP Application > VRRP > Configuration
Verify
1. In this screen will display the VRRP status and will show the master switch.
Figure 4, Switch 1, IP Application > VRRP
2. In this screen will display the VRRP status and will show the backup switch.
Figure 5, Switch 2, IP Application > VRRP
www.zyxel.com
50/100