Fujitsu LifeBook C-7651 Manual page 91

6. Install the memory.
Align the notch in the RAM module with the protrusion on the connector, insert it diagonally in the
slot, and tilt it over until it clicks into place.
Notch in the RAM module
7. Close the keyboard carefully.
While aligning the tabs on the keyboard with the notches in the computer upper panel, close the
keyboard carefully so as not to catch any cable between the keyboard and the computer.
Keyboard
Tabs on the keyboard
8. Attach the cover and secure it with a screw.
Reattach the cover that was removed in step 3.
9. Attach the screw cover as it was.
Screw cover
Cover
73