Fujitsu LifeBook C-7651 Manual page 58

Resume (Restoring suspended operation)
There are three ways to resume operation.
Using the SUS/RES switch
Use this method if you placed the computer into standby mode, using the Shut Down Windows dialog
box or the SUS/RES switch.
1. Make sure that the
2. Press the SUS/RES switch
After a while, the system will resume at the same point as when you suspended operation.
Status indicator LCD
(The illustration varies depending on the model and use conditions.)
Critical Point
Don't hold the SUS/RES switch down for more than 4 seconds. If you do so, the computer
will be turned off and the data currently processed will be lost.
Opening the LCD display
Use this method if you placed the computer into standby mode by closing the LCD display.
1. Make sure that the
2. Open the LCD display.
Unlock the LCD display by sliding the latch on the front panel to the right, and lift the display while
holding the computer with a hand.
After a while, the system will resume at the same point as when you suspended operation.
Latch
Status indicator LCD
(The illustration varies depending on the model and use conditions.)
40
icon is blinking on the status indicator LCD.
SUS/RES switch
icon is blinking on the status indicator LCD.
LCD display