Using the SUS/RES switch
1. Make sure that the
2. Press the SUS/RES switch
After a while, the
Status indicator LCD
(The illustration varies depending on the model and use conditions.)
Critical Point
Don't hold the SUS/RES switch down for more than 4 seconds. If you do so, the computer
will be turned off and the data currently processed will be lost.
Closing the LCD display
1. Make sure that the
the LCD display.
After a while, the
Status indicator LCD
(The illustration varies depending on the model and use conditions.)
Critical Point
To prevent the computer from going into standby mode each time the LCD display is closed,
select "Never" under "When the notebook is closed" on the Advanced tab of the Power Man-
agement Properties dialog box. By default, this option is set to "Stand By."
or
icon is not displayed on the status indicator LCD.
icon blinks on the status indicator LCD and the LCD display goes off.
SUS/RES switch
or
icon is not displayed on the status indicator LCD, then close
icon blinks on the status indicator LCD.
LCD display
39