Fujitsu LifeBook C-7651 Manual page 74

Critical Point
If the tray won't come out:
- When Windows is terminated, slide the mode switch down to the lower position, then press
the EJECT button.
- If the MAIN switch is off (in the O position), slide it to the | position to turn the power on, and
then press the EJECT button.
You may press the EJECT button even when the
blinking. You can stop it from blinking if you want.
3. Set a disc on the tray while holding the tray.
Align the hole of the disc with the projection at the center of the tray with the labeled surface up,
and push the disc down until it clicks into place. Failure to fit a disc correctly onto the projection
could prevent the disc from being ejected.
4. Push the tray gently into the computer.
It takes about 10 seconds for your computer to get ready to start the loaded CD..
56
Projection
Disc tray
Disc tray
icon on the status indicator LCD is