Critical Point
If the tray won't come out:
- When Windows is terminated, slide the mode switch down to the lower position, then press
the EJECT button.
- If the Main switch is off (in the O position), slide it to the | position to turn the power on, and
then press the EJECT button.
You may press the EJECT button even when the
blinking. You can stop it from blinking if you want.
4. Take out the disc while holding the tray with a hand.
To detach the disc, lift the edge of the disc while holding the projection with a finger, as shown
below.
Disk tray
5. Push in the tray gently until it clicks into place.
58
Projection
icon on the status indicator LCD is