Sony NWZ-A826 Operation Manual page 237

Other
There is no beep
sound when the
player is operated.
The player gets warm.
The screen turns on
whenever songs
change.
The date and time
have been reset.
• "Beep Settings" is set to "Off:'
~
Set "Beep Settings" to "On"
«if'
page 100).
• The beep does not sound when the player is connected to the optional cradle, or
another device.
• The beep does not sound while the Bluetooth function is turned on.
• The player may be warm when the battery is being charged and just after charging.
The player also may get warm when a large amount of data is transferred. This
behavior is normal and not cause for concern. Set the player aside for a while to
allow it to cool down.
• "New Song Pop Up" is set to "On:'
~
Set "New Song Pop Up" to "Off"
«if'
page 33).
• If you left the player for a while with the battery used up. the date and time may
be reset. This is not a malfunction. Charge the battery until
ql••
1
appears on the
screen and set the date and time again
«if'
page 104).
To initialize (format) the player
Be sure to format the built-in flash memory using the Menu mode on
this player following the procedure below. (Check all contents before
formatting as all data stored will be erased.)
1
Press and hold the BACK/HOME button in the pause mode
until the Home menu appears.
2
Select
E3
(Settings)- "Common Settings" - "Format" - "Yes" -
"Yes:' in this order.
Press the
Ji../""/~/~
button to select the item, and then press the
~II
button to confirm.
After selecting "Yes" and confirming, "Formatting..:' appears and
formatting starts. When formatting is complete, "Memory
formatted:' appears.