RC Groups VLX230C Assembly Manual page 12

7
Loose limbs, from either crashing or tiny irregularities in the production of the materials, can be
felt by gently wiggling your arms from time to time to verify a solid frame. If you find you have a
tiny bit of wiggle, there is a simple solution.
If a limb is "loose" a small amount of electrical tape (or whatever tape that is paper thin) placed
around the tops of the tabs of the limb and then the top plate locks it in place when it's all re-
assembled takes away the gap and results in a solid frame once again.
FITTING LIMBS
Tape
Tape
Tape
What you need for this step
Tape
Electrical tape