D) Ntp; E) Email - Night Owl THD301 Series User Manual

7.6.2 (d)
NTP
You can configure the NTP server details to obtain current date and time.
Enable NTP: Enable the DVR to connect to an NTP server.
Interval (min): The amount of time in minutes that will elapse between the DVR
updating its internal clock to match that of the NTP server. The default period of
60 minutes is recommended.
NTP Server: The default server used to obtain accurate date and time.
NTP Port: The default is 123, you should only change this if you're using a
different NTP server and you know that it uses a different port. If you're using
pool.ntp.org, ensure the port is 123.
7.6.2 (e)
Email
In this section of the menu, you can configure Email settings to allow alarm
notifications to be sent from your DVR.
Enable Server Authentication: If your outgoing mail server requires authentication,
ensure this box is checked.
Username: The Username for the outgoing email account.
Chapter 7: Menus and Settings 61