If your DVR is not able to establish Internet connectivity, a Connection Failed screen
will appear. Follow the instructions on this screen to re-test the network.
If you wish to proceed with the DVR setup without a network connection, you may
do so by clicking the box marked, "I do not want to connect to a network."
6.1.3
Firmware Check
The Firmware Check screen of the Startup Wizard will automatically check for
updated firmware for your DVR.
NOTE:
If your DVR does not have a network connection, the firmware will not update.
When the firmware for your DVR is updated to the most current version, the
Startup Wizard will display the above screen.
26
THD Series
User's Manual