Night Owl THD301 Series User Manual page 13

Images used are for reference only. Your product may vary slightly.
1. Video Inputs – video inputs allow for the connection of BNC cameras.
2. Audio Inputs – audio inputs allow for the connection of audio enabled cameras
by connecting the white RCA plug to one of the audio inputs. After making
the audio input connection, be sure to enable the audio function in the DVR's
menu interface.
3. Audio Output – audio output allows for the connection of an amplified speaker.
4. HDMI Output – HDMI output allows for the video connection. If the TV/Monitor
has an HDMI input, connect the HDMI cable from the HDMI output port on
the DVR to the HDMI input port on your TV/Monitor.
5. VGA Output – VGA output allows for the video connection. If the TV/Monitor
has a VGA input, connect the VGA cable from the VGA output port on the DVR
to the VGA input port on your TV/Monitor. (VGA Cable not included)
6. RJ-45 (Ethernet) Port – RJ-45 port will be used to connect the DVR to
your router/modem via the included Ethernet cable. Keep in mind, you can
quickly network your DVR to begin viewing your cameras remotely right from
your mobile device by completing the DVR's Startup Wizard once you have
connected the DVR to your router and powered on the DVR.
7. USB Backup – USB ports allow for the connections of a USB mouse and/or
a USB flash drive. You will connect a USB flash drive to download video files
from the DVR and save them to your USB flash drive.
8. USB Mouse – You will connect the included USB mouse to assist you in
navigating the DVR's menu interface.
9. Power Input – power input to connect the included 12V DC power supply.
Chapter 3: Specifications
VIDEO IN
Video Inputs
REAR VIEW
An 8 channel model is displayed above.
VGA Audio Network
Output Input Ready
AUDIO
VGA
IN
AUDIO
HDMI LAN / USB
OUT
HDMI Audio USB
Output Output Backup
GROUND
USB
Mouse
POWER
12V
Power
Input
13