Adjustment; Controls; Test Mode Operation Features - Kenwood NX-210 Service Manual

NX-210

Controls

Selector
Side1 key
PTT switch
Side2 key
36
TROUBLE SHOOTING
(Not used)
NXDN ESN Label (12 digits)
Kenwood ESN Label
(Not used)
(Not used)

ADJUSTMENT

Orange key
Power switch / Volume
Universal
connector
NXDN ESN Label (12 digits)
Kenwood ESN Label
Cut-off Line
Note:
A UPC code and UPC barcode is not printed on the Ken-
wood ESN Label. If necessary, cut the label at the cut-off
line and attach only the serial number.
Panel Test Mode

■ Test mode operation features

This transceiver has a test mode. To enter test mode,
press and hold the [ ] key while turning the transceiver
power ON. Before the transceiver enters test mode, the
frequency version information appears on the LCD mo-
mentarily. Test mode can be inhibited by programming. To
exit test mode, turn the transceiver power OFF. The follow-
ing functions are available in test mode.