InFocus SplashX Instructions page 3

9. Click Start and wait patiently. Your image will begin to display in the SplashX window.
Note: If this is the first time you have used SplashX, it will take several minutes for your
image to load.
10. When the process is complete, the image will be fully displayed in the SplashX window
and the message "Done" will appear in the lower left of the screen. Your custom image is
now the default Search Screen image.
11. To assign your custom image as the projector's Blank Screen:
a. Turn on the projector and click the Menu button on the projector keypad.
b. Navigate to the Advanced Menu > Setup > Keypad/Remote submenu.
c. Navigate to Blank Key and select User.
Page 3 of 4
009-1650-00