SplashX
Use these instructions to load a custom image onto your SplashX compatible projector, such as
your company or school logo. The custom image can be used as a search screen or blank
screen image.
Required equipment
•
USB-A to USB-B cable
•
Windows
®
computer
•
SplashX-compatible projector
•
Power cord
Source image specifications
Supported formats
BMP (≤24 bit color depth), JPEG, or PNG.
Image resolution
The source image should be the same size as the
target projector.
SplashX compatibility
Windows XP, Vista, 7, 8, 10
Before you begin
Use these instructions to turn off Power Saving Mode in your projector.
IN1116/IN1118HD note: You cannot turn off Power Saving Mode on the IN1116 and IN1118HD
projectors. If you have an IN1116 or IN1118HD projector, please proceed to the next section.
1. Turn on the projector.
2. Press the Menu button on the remote or projector keypad.
3. Navigate to the Advanced Menu > Setup > Power submenu.
4. Change the Power Saving Mode to Off.
5. Turn the projector off.
Page 1 of 4
009-1650-00
To determine your projector's
resolution
: Select the Advanced Menu >
Status/Service > Projector Info submenu
in the projector OSD menu and review
Native Resolution.