Setup And Installation - InFocus SplashX Instructions

Setup and installation

1. Connect your projector to the computer using a USB cable (either a USB-A to USB-B or
USB-A to USB Micro-B depending on your projector).
2. Connect a power cord to your projector.
3. If you have an IN1116 or IN1118HD projector, turn on the projector. Otherwise do not
turn on your projector.
4. Download the SplashX.exe application from
your computer.
5. Unzip the SplashX file.
6. Double-click the SplashX executable file (.exe).
7. If you see a Windows security warning, click Run.
8. Click the Browse (...) button and navigate to the image you wish to upload.
Page 2 of 4
009-1650-00
www.infocus.com/support and save it to