Miele CM6350 Operating Instructions Manual page 65

 Fill the water reservoir to the  mark
with lukewarm water.
 Place 1 descaling tablet in the water.
Follow the instructions for the mixing
ratio carefully. It is important that you
do not fill the water reservoir with too
much or too little water. Otherwise
the descaling process will be can-
celled prematurely.
Performing a descale
 Replace the water reservoir.
 Follow the instructions given in the
display.
When Rinse the water container and fill with
fresh tap water up to the descaling symbol
 appears in the display:
 Carefully rinse the water reservoir
with clean water. Ensure that no
descaling solution residue remains in
the water reservoir. Fill the water
reservoir to the  mark with fresh tap
water.
The descaling program is finished at the
end of the rinsing cycle and drinks can
be made again.
Descaling the machine
To protect the appliance and sur-
rounding surfaces from damage,
make sure you wipe up any spills or
splashes of descaling agent immedi-
ately.
Descaling when not prompted
by a message
 Tap .
 Select
Maintenance
 Select
Descale the appliance
The descaling process cannot be can-
celled once you have tapped "OK."
The process has to be completed
through to the end.
 Tap OK.
The descaling process will begin.
and tap OK.
.
65