Communication; Binary Input/Output Options; Supported Communication Interface And Protocol Alternatives - ABB RET630 Product Manual

Transformer protection and control
Table of Contents

Advertisement

Transformer Protection and Control
RET630
Product version: 1.0
Table 4. Binary input/output options
Binary input options
Default
With one optional binary I/O
module
With two optional binary I/O
modules

17. Communication

The IED supports the new IEC 61850
substation automation standard including
horizontal GOOSE communication as well as
the well-established DNP3 (TCP/IP) protocol.
All operational information and controls are
available through these protocols.
Disturbance files are accessed using the IEC
61850 protocol. Disturbance files are
available to any Ethernet based application in
the standard COMTRADE format. Further, the
IED sends and receives binary signals from
other IEDs using the IEC 61850-8-1 GOOSE
profile. The IED meets the GOOSE
performance requirements for tripping
applications in distribution substations, as
defined by the IEC 61850 standard. The IED
interoperates with other IEC 61850 compliant
IEDs, tools and systems and simultaneously
reports events to five different clients on the
Table 5. Supported communication interface and protocol alternatives
1)
Interfaces/Protocols
IEC 61850
DNP3
● = Supported
1) Please refer to the Selection and ordering data chapter for more information
14
BI
14
23
32
IEC 61850 station bus. For a system using
DNP3 over TCP/IP, events can be sent to four
different masters.
All communication connectors, except for the
front port connector, are placed on integrated
communication modules. The IED is
connected to Ethernet-based communication
systems via the RJ-45 connector (10/100BASE-
TX) or the fibre-optic multimode LC
connector (100BASE-FX).
The IED supports SNTP, DNP3 and IRIG-B
time synchronization methods with a time-
stamping resolution of 1 ms.
Ethernet based:
• SNTP (Simple Network Time Protocol)
• DNP3
With special time synchronization wiring:
• IRIG-B (Inter-Range Instrumentation Group
- Time Code Format B)
Ethernet
100BASE-TX RJ-45
1MRS756788 A
Issued: 15.09.2009
BO
9
18
27
Ethernet
100BASE-FX LC
ABB

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents