4: Preparing The Amplifier And The Remote - Sony TA-DK2 Operating Instructions Manual

4: Preparing the amplifier
and the remote
Connecting the AC power cord
Connect the AC power cord to a wall outlet.
AC power cord
R L
R L
FRONT B
16
GB
To the wall outlet
Performing initial setup
operations
Before using the amplifier for the first time,
initialize the amplifier by performing the
following procedure. This procedure can also
be used to return settings you have made to
their factory defaults.
Be sure to use the buttons on the amplifier for
this operation.
1,2
KEY
HIGH HIGH
CONTROL
?/1
MID MID
DISPLAY
KARAOKE
ON/OFF VOCAL
LOW LOW
SELECT
ECHO LEVEL
MIC 1 VOL MIC 2 VOL
SCORE
MIN MAX MIN MAX ECHO
MIN MAX
DELAY
MIC 1 MIC 2
KARAOKE
1
Press ?/1 to turn off the
amplifier.
2
Hold down ?/1 for 5 seconds.
"CLEARING" appears on the display for
a while. Then, follows by "CLEARED".
The following items are reset to their
factory settings.
• MASTER VOLUME is set to "VOL
MIN".
• Input is set to "DVD".
• D.B.F.B. is set to "D.B.F.B. OFF".
• Karaoke mode is set to "KARA OFF".
• Balance L/R level is set to
"BALANCE".
• Sub woofer level is set to SW 0 dB.
HIGH
D.B.F.B. MASTER VOLUME
MID
LOW
MUTING
MUSIC VOLUME
INPUT SELECTOR
ECHO BALANCE SPEAKERS
REPEAT L R (OFF/A/B/A+B)