Disposal - X4 TOOLS 3D-Printing Pen 2.0 User Manual

The outputted plastic is too stiff and the motor makes
abnormal noises:
• The temperature in the heating chamber is too low.
• Check if you have chosen the right mode (PLA or ABS) for the
used filament. If yes, increase the temperature manually by
pressing the arrow button on the right side of the temperature
display.

Disposal

Electrical- and electronic devices must never be disposed of
in the regular household waste!
Consumers are legally obligated and responsible
for the proper disposal of electronic and electrical
devices by returning them to collecting sites
designated for the recycling of electrical and
electronic equipment waste. For more information
concerning disposal sites, please contact your local
authority or waste management company.
23