X4 TOOLS 3D-Printing Pen 2.0 User Manual page 15

User Manual | 3D-Printing Pen 2.0 | ENGLISH
We are pleased that you have decided to buy our product and
wish you an enjoyable and successful use.
Information on this user manual
This user manual contains important information for the safe
use of the product. Therefore, for your own safety and for a
successful use, please read this user manual completely before
assembling and using the product. Please keep this operating
manual for reference. If you pass on the product to anyone else,
please hand over the operating manual as well.
Liability
We do not accept liability for any damage to property or for
personal injury that is due to improper use or failure to follow
the instructions in this operating manual and the safety advice.
In such cases any claim under the guarantee is null and void!
Designated Use
The X4-TOOLS 3D-Printing Pen 2.0 is for creating three-
dimensional objects made of PLA or ABS plastic. The material,
which is also used for 3D printers, is melted through heating it
up and solidifies again when put to room temperature.
The designated use is defined by the instruction manual and in
following the appliance and the warnings mentioned in this user
manual. This product is not suitable for commercial usage.
15