Safety Guide - X4 TOOLS 3D-Printing Pen 2.0 User Manual

Safety guide

read all following instructions carefully.
• The power adapter is not a toy!
• Risk of strangulation! The cables of this product may become a
danger for children.
• Not suitable for children. Only to be used by adults.
• Risk of burning! The ceramic tip gets very hot and may not
be touched. The tip is to be kept away from highly flammable
objects. The filament output is also very hot and may only be
touched after it has cooled down. The tip as well as the hot
filament can damage clothes, surfaces and other objects.
• The product may not be subjected to extreme heat or cold.
Do not expose the product to intense sunlight, open fire or
other heat sources: Storage temperature: -0°C to 40°C; Working
temperature: 0°C to 40°C.
• Do not use this product in the near of water like for example
bathtubs, showers or wash basins. There is danger that can even
lead to death by electric shock.
• Never leave packaging material lying around unsupervised – this
can become a hazardous toy for children and/or pets and lead to
serious injuries, e.g. suffocation.
• Contact a service technician if there is any reason to believe
that the operation or safety of the device has been impaired.
Please adhere to the additional safety information found in the
individual chapters of this instruction manual. Should you be in
doubt of the correct operation of this device or questions arise
18
CAUTION!
The following safety and danger references/notices
serve not only for the protection of the product, but
also the protection of your safety and health. Please