X4 TOOLS 3D-Printing Pen 2.0 User Manual page 19

that are not explained within this manual, please contact our
technical hotline or a service technician for further information.
• Only use the original power adapter that is included in the scope
of delivery for running this product.
• If there is any doubt in the safety of this device (e.g. because
of damage to the enclosure, cables, the power adapter or the
internal transformer), the device should not be used until the
damage has been properly removed.
• Should the device start to generate black or brown smoke, stop
the application immediately and pull the power plug. Please
contact the X4-TOOLS service directly.
WARNING!
MISUSE MAY CAUSE RISK OF DAMAGE. INCORRECT
USE OF THE DEVICE MAY LEAD TO DAMAGES.
• Only use ABS- or PLA-fi lament according to custom with a
diameter of 1.75 mm.
ATTENTION!
ABS fi lament has a higher melting temperature than
PLA. If you change from PLA to ABS, PLA remains inside
the pen can briefl y generate a bit smoke.
19