After taking out filament wire from the pen, the partly melted
material at the end of the wire must be removed before it can be
used again. To do so simply cut the end with scissors, so that you
get a straight cut at the wire again.
Box contents
3D-Printing Pen 2.0
2x 10 m plastic filament wire (PLA)
Manual
Power adapter
Technical data
Power adapter
Dimensions
Weight
Cable length
20
AC 100/240 V ~50/60 Hz /
DC 12 V 3,0 A
18.5 x 4.5 x 3.1 cm
63 g; 152 g (power adapter)
1.18 m