Language Select; To Set The Air Pressure (Barometric Pressure) - Agilent Technologies 3200D Operating Manual

2 Operation


Language select

To set the air pressure (barometric pressure)

34
This meter supports Chinese and English languages.
1 From the initial state, press [Setup]. The setup screen
appears. See Figure 12
2 Use the directional arrow keys to navigate to Language Select.
3 Press [Enter] to select Language Select or press [Cancel] to exit.
4 The Language Select screen appears on the display. Use the
arrow keys to choose either Chinese or English and press [Enter].
You do not usually need to set barometric pressure. The default
value is 101.3kPa.
1 From the initial state, press [Setup]. The setup screen
appears. See Figure 12
2 Use the directional arrow keys to navigate to Air Pressure.
3 Press [Enter] to select Air Pressure or press [Cancel] to exit.
4 The Air Pressure screen appears on the display. Enter the
atmospheric pressure.
Figure 18 Set Air Pressure (barometric pressure)
on page 26.
on page 26.
3200D Dissolved Oxygen Meter Operating Guide