Turning The Mondocenter On/Off; Maintenance - InFocus MONDOCENTER 3 Hardware Manual

TURNING THE MONDOCENTER ON/OFF

• To turn the MondoCenter on: Verify that the power switch on the rear panel is in the ON position (a). Press the Power button on the
MondoCenter (b). Wait a few seconds.
• To put the MondoCenter into standby: Press power button (b).
• To completely power down the MondoCenter: Press and hold the Power button for 4 seconds (b). Toggle the power switch on the
rear panel to the OFF position (a).

MAINTENANCE

1) Unplug the MondoCenter from power.
2) Moisten a soft, dry cloth with water.
3) Lightly wipe the cleaning cloth over the module.
4) Wipe dry with a soft, dry cloth.
WARNING:
Do not allow liquids to enter the MondoCenter. Spilled liquid may damage your MondoCenter.
WARNING:
Do not attempt to service this product yourself as opening and removing covers may expose you to dangerous voltage and
other hazards. Refer all servicing to qualified service personnel.
MondoCenter3 Hardware Guide
b
a
Page 13