Sony HCD-PX5 Service Manual page 18

QQ
3 7 63 1515 0
9
qf
qg
0
qa
qh
qj
qs
qk
qd
ql
9 SLEEP button
Press to set Sleep Timer. (page 56)
0 NAME EDIT/SELECT button
Press to display the text input screen and to select
the type of characters to be input. (pages 20, 41,
55)
qa Letter/Number buttons
Press to select track numbers of a CD, MD, or
preset station.
Press to enter the corresponding letter or number
at the character input screen. (pages 20, 41, 55)
qs FUNCTION button
Press to switch the sound source.
Each time you press this button, the sound source
changes as follows;
t CD t TUNER t OPTICAL IN
TAPE T MD T ANALOG IN T
TE
L 13942296513
Step 2: Setting the time
You must set the time beforehand to use the timer
functions.
1
2
DISPLAY
3,4,5
TCURSOR CURSORt
3,4,5 3,4,5
1
Turn on the system.
2
Press CLOCK/TIMER SET.
The time setting display appears, and the day
indication SUN flashes.
www
.
6
18
http://www.xiaoyu163.com
qd PRESET EQ button
Press to select the type of the preset equalizer.
(page 54)
qf STEREO/MONO button
Press to switch between stereo and monaural
when receiving a stereo broadcast.
qg SCROLL button
Press to display the disc title or track title
scrolling. (pages 19, 21, 25, 42)
qh CLEAR button
Press to cancel the selection. (pages 18, 21, 23,
42, 56)
qj TUNER/BAND button
Press to select the tuner for the sound source, or
to select the FM or AM band.
qk VOLUME +/— buttons
Press to adjust the volume.
ql DBFB button
Press to reinforce the bass sound. (page 54)
75
3
Press — or + to set the day, then press
ENTER/YES or CURSORt.
The hour indication flashes.
(Noon is indicated as 12:00 PM, and
midnight as 12:00 AM.)
4
Press — or + to set the hour, then press
ENTER/YES or CURSORt.
The minute indication flashes.
5
Press — or + to set the minute, then press
ENTER/YES.
The clock starts.
If you made a mistake
Press TCURSOR or CURSORt until the
indication you wish to change (day, hour, minute)
flashes, then change the setting.
To cancel setting the time
Press CLOCK/TIMER SET.
x ao
y
i
http://www.xiaoyu163.com
8
Q Q
3 6 7 1 3
Showing the time
In consideration of reducing standby power, this
system can select whether or not to display the
clock in standby mode. The system is set at the
factory to not display the clock when the system is
off (Power Saving Mode). To display the clock
even when the system is off, press DISPLAY or
TIME while the system is off. Press the button
again to turn the clock display off and activate the
Power Saving Mode.
While the system is on, the information that
appears at the upper level of the display changes
as follows each time you press DISPLAY.
t Preset Equalizer name t Clock
Name* T Volume T
* Displayed only when disc title, track title, radio
station name or other name information is labelled.
Nothing appears when this information is not
labelled.
Tip
The upper dot of the clock display flashes for the first
half of a minute (0 to 29 seconds), and the lower dot
flashes for the last half of a minute (30 to
59 seconds).
Changing the preset time
1 Press CLOCK/TIMER SET, then press — or +
until CLOCK SET? appears. Press ENTER/
YES.
2 Repeat steps 3 to 5 of Setting the time .
You can change the preset time while the system
is off. In this case, perform steps 2 to 5 of Setting
the time .
u163
.
2 9 9 4 2 8
1 5 0 5 8 2 9 9 4
m
co
9 9
2 8 9 9