Omron NB3Q-TW00B Startup Manual Manual page 66

4 Screen Creation
User should use this method to create total 8 screens for this project, the screen No. and names
are listed as below:
10
11
12
13
14
15
16
17
2
Double-click "Wait" Screen to open [Screen Property], select "Background Color" and set
"Background Color" to "lightCyan".
Bit Button Component
1
Bit Button component for switching to the maintenance screen
The Bit Button component is placed on the upper left corner of the screen. Pressing this hiding
button (Bit Button component) to switch to maintenance screen ([6 Check 1] screen).
Function: Pressing the button and turn ON W_bit0.02, the display of PT will be switched to [6.
check 1] by the ladder program of CP1E. The Function Key is set transparent and will not
function until being pressed for 3 seconds for the purpose of avoiding being pressed
accidentally.
Select [Bit Button component] from [Parts], drag it to the edit window after selecting it with a
single-click.
The property settings are:
Write Address
Bit Button Types
Graphics
Control Setting
(Security Setting)
4-14
Screen No
Wait
Open
Close
Stop
Fully Open
Check1
Check2
Check3
W_bit0.02
On
Use the vector graphic:
Dashed.vg (A vector graphic created by user,
which is a light cyan rectangle)
ON Delay 3s
Screen Name
NB-series Programmable Terminals Startup Guide Manual(V109)