Transmission / Hyd Oil; Transmission / Hyd Oil - Branson 9550C User Manual

7
 BRANSON 9550C
-

TRANSMISSION / HYD OIL

(1) Inspection Window
►CHECKING OIL
Check the fluid level through the in-
spection window at the rear side of
the transmission compartment.
The level should be 1/3 above in up-
per window. If the fluid level is below
proper lever, add fluid
BR95O527A
(1) Drain Plug
(1) Oil Filler
►CHANGING OIL
Drain the fluid through the drain
holes under the rear axle case and
rear axle housing. Supply the fluid
through the filler hole behind the hy-
draulic case.
1. Transmission oil can be used for
the hydraulic system and for the
power steering unit.
2. Make sure to use the genuine
BR95O701A
Branson transmission fluid.
•
Drain the oil when oil is warm
but be careful. If oil is hot,
there is a risk of getting burnt.
•
Be sure to turn "OFF" the main
switch to stop the engine be-
fore pulling out the oil dipstick.
BR95O702A
CAUTION
DANGER