Pto Switch; Pto Switch; Down Rate Control Dial; Down Rate Control Dial - Branson 9550C User Manual

PTO SWITCH

(1) PTO Switch

(2) PTO Selection Switch
The engine is not started if the PTO
ON/Off switch is in "ON" position.
Place the PTO ON/Off switch is in
"Off" position before starting the en-
gine.
To operate the PTO, turns ON by
pulling the PTO ON/Off switch up-
ward.

DOWN RATE CONTROL DIAL

BR95O508A
(1) Lowing flow Control Dial
Lowing speed of the implement is
controlled by the lowing rate control
dial.
Lowing speed varies depending on
the and the lowing flow control dial
and weight on the implement. The
heavier the implement, the faster the
rate of lowing.
If you turn the dial clockwise, the
lowing rate will be faster.
If you turn the dial fully in a counter-
clockwise, the implement will not be
lowered.
•
Excessive lowing speed can
cause injury or damage of the
tractor and implement. A suit-
able down speed of the imple-
ment is 2 sec. from the max.
BR95O463A
height. to the min. height.
CAUTION