Panasonic KX-T30810 Installation Manual page 61

Description
There are 12 memo1y locations for automatic
- ,
dialing available. Up to 32 digits can be stored
into each of the 12 memory locations. Push ing
" * ", " # " ,
"FLASH " or "PA USE"
"
the
"
b utton counts as 1 digit.
For your con ven ience, program private phon
Ill
numbers into the KX-T30830, KX-T30820 or
KX- T30850.
Programming
Be sure the handset is in the crad!C' and the
SF-PHONE button is OFF.
1 . Set the MEMOR Y switch to "PROGRA M ' '.
"ONE TO UCH DIA L " will be displayed.
2 . Press a programmable feature button.
The L CD will sho w " MOl : NOT STORE D "
when nothing is stored in the programmable
feature button ''01 ''.
When automatic line access number 9 and the
phone number 123-456-7890 has been stored,
"MOl : -123-456-7890" will be displayed.
3 .
Enter the line access n umb er.
9: automatic line access n wnber
81 : line access number of CO
82 : line access n umber of CO
83 : line access n umber of CO
4.
Enter the phone number.
You may r.'nter punctuations during
e
phone number.
The SN R b utton is used as the "- " button.
To erase a wrong enter, press the CLEA R
11!1
button.
The TRA NSFER b utton is used as the
CLEAR b utton.
5 .
Press the MEMOR'( button .
The MEMOR Y indicator will be lit.
6.
to 5, to program on other
Repeat steps 2
programmable feature button.
7.
After programming all the n umbers, return
the MEMORY switch to the "SET" position.
Th e MEM O R Y indicator will go out.
Dialing
I"
Conditions
1
2
3
a
Examples:
Programming
Dialing
3-5
1 .
Lift the handset or press the SP-PHONE
button.
2 .
Press a programmable feature button.
® You may press the CO button to select the
CO line directly after lifting the handset o r
pressing the SP-PHONE button.
" ¢ , ¢ " button
To more the 13 digits of a phone number, use
11'!1
the or
" "
display.
of
The dialed phone number will be displayed on
Ill
the L CD of the KX-T30830.
• Continuous use the programmable fearurr.'
button is possible. (ex. press 01 -02)
® The combinations of speed dialing, one-touch
dialing and manual dialing is possible.
The line access n umber (9, 81 , 82 or 83 )
1!11
should be stored.
• Continuous use of one touch dialing is possi­
ble.
Example:
[01 ] [02]
In this case, programmable feature button
" 02 " should not include the line access
number.
® When dialing,
the pause is automatically
entered after line access number (9, 81, 82 or
83) .
® Features that can be accessed by using the
f!ta !ing button also can be programmed into
memory.
R efer to "One Touch A ccess for System
Features " page 3-25.
A utomatic line access number 9 and phone
number 123-4567 into the programmable fea­
ture "01 " button.
[Set to " PROGRAM"] [
[1 23-4567) [MEMORY) [Set to
HANDSET) [01 ]
[LI FT
• You may press the CO button to select the CO
line directly after lifting the handset.
the
for scrolling
)
01 [9]
SET']
"