Panasonic KX-T30810 Installation Manual page 19

Electronic modular switching system easa-phone
Hide thumbs Also See for KX-T30810:
Table of Contents

Advertisement

1 .
Connect the cord from the optional KX-A1 6 to
the KX- T30810.
2.
Plug in the A C power cord from the KX-A16.
3.
Turn on the Power Switch located on the
KX-A16.
®Approximately 24 hours is required to recharge
the KX-A16.
® The KX-A1 6 will work for approximately 4
hours (on the average) in the event of power
failure.
KX-T30810
Battery
Connector
The Battery life is 3 years.
e
•A simple way to check the KX-A1 6 is to
disconnect the KX-T3081 0 and the KX-A1 6
from the A C outlets, and then to observe if the
KX- T30810 operates.
�t�Jf the KX- T30810 does not operate, recharge
the KX-Al6.
•A C Primary Fuse, (250 V, 1 . 25 A)
Replace the fuse which is in the fuse holder
located on the rear, if the CHAR GE Indicator
is off.
(Keep the uni t away from heati n g
appliances. )
BATTERY LOW Indicator:
wi l l be li t whi l e recharging
is insufficient.
1-13
wi l l be li t whi l e the adaptor
is being recharged.
X]:

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents