Drive Chain Sliders; Drive Chain Rollers; Driven Sprocket - Honda CR125R 2004 Owner's Manual

DRIVE CHAIN SLIDERS

1. Check the chain slider for wear.
If the wear is 3/16 in (5 mm) or more, replace it.
(1) CHAIN SLIDER
2. Check the chain guide slider for wear.
Replace the guide slider if the chain is visible
through the wear inspection window.
(1) CHAIN GUIDE SLIDER
(2) INSPECTION WINDOW

DRIVE CHAIN ROLLERS

Check the drive chain rollers for wear. Replace if neces-
sary.
SERVICE LIMIT:
UPPER ROLLER: 1.4 in (35 mm)
LOWER ROLLER: 1 in (25 mm)
(1) DRIVE CHAIN ROLLERS
NOTE:
•
If the upper drive chain roller removal, install the
drive chain roller with its "→" mark side facing out.
1
(1) "→" MARK

DRIVEN SPROCKET

Check the driven sprocket nut torque values after each
race.
TORQUE: 24 lbf ft (32 N m, 3.3 kgf
• •
m)
•
43