CT secondary to be earthed. PRESENTATION COUNTIS ATv2 / ATiv2 SINGLE RATE kWh display Total and partial meter display, or scrolling parameter settings Flashing LED consumption indicator (10 Wh/pulse) Validation/scrolling of parameter settings...
• Avoid vibrations including accelera- tions of more than 1 G for frequen- CONNECTION cies lower than 60 Hz. The Countis ATv2 and ATiv2 consist of connection terminals of 1 to 6 mm Note: currents and voltages. The minimum torque for the fixed terminal is 0.8 Nm.
Page 6
1 Fuses 0.5 gG or BS 88 2A gG RATE INPUT (t1 / t2) CONNECTING PULSE OUTPUT The neutral has to be connected for the dual External counter t1 = 0 VAC tarif ATiv2. t2 = 230 VAC External power supply SOCOMEC - Ref. : 875 645 D...
(rSET). To select ‘rSEt nO’ (no reset to zero) and ‘rSEt YES’ (reset to zero). To confirm reset to zero and return to network type programming. To confirm and quit programming. SOCOMEC - Ref. : 875 645 D...
230 V AC - 15 % to 400 V AC + 20 % ≤ 0,5 VA Consumption AUXILIARY POWER SUPPLY Note: Type auto-powered The Countis ATv2 and ATiv2 are auto- ≤ 1 VA Consumption powered from the V1 et V2 voltage inputs. ACCURACY Accuracy index...
Need help?
Do you have a question about the COUNTIS ATv2 and is the answer not in the manual?
Questions and answers