Pair Transmitter To Pager; Key To Pager Signals - Abilia All In One User Manual

Pair transmitter to pager

1 To link a transmitter, press and hold the pager acknowledge button.
Release the button when the two centre diode lights start to flash.
2 Press the transmitter test button within 10 seconds to pair the units.
3 A diode light on the pager will come on to show that the transmitter is linked:
 Orange diode - Transmitter 1
 Green diode - Transmitter 2
1 2
Repeat steps 1-3 to link a new transmitter. You can link up to 4 units.
Delete linked transmitter
1 Press and hold the pager OK button until the two centre diodes begin
to flash. Press the button three times in quick succession.
2 All the diodes will flash twice to show that the linked transmitters have
been deleted. This action cannot be cancelled.
1
Chapter 2 Install pager.
16
 Yellow diode - Transmitter 3
 Red diode - Transmitter 4
3
1 2 3 4
2

Key to pager signals

The pager shows which sensor and transmitter has activated by using various
diode colours and flashing patterns.
Note: The pager diode colours and flashing pattern differ depending on
whether you have ONE or SEVERAL transmitters linked to the system.
System with ONE transmitter - Each sensor has a dedicated diode colour
Activated transmitter Activated sensor
Transmitter 1 Sensor 1
Transmitter 1 Sensor 2
Transmitter 1 Sensor 3
Transmitter 1 Wireless alarm unit
Transmitter 1 Test button
System with - Each transmitter has a dedicated diode colour
SEVERAL transmitters - Sensors are identified by flashing pattern
Activated transmitter Activated sensor
Transmitter 1 Sensor 1
Transmitter 1 Sensor 2
Transmitter 1 Sensor 3
Transmitter 1 Wireless alarm unit
Transmitter 1 Test button
Transmitter 2 Sensor 1
Transmitter 2 Sensor 2
Transmitter 2 Sensor 3
Transmitter 2 Wireless alarm unit
Transmitter 2 Test button
Transmitter 3 Sensor 1
Transmitter 3 Sensor 2
Transmitter 3 Sensor 3
Transmitter 3 Wireless alarm unit
Transmitter 3 Test button
Transmitter 4 Sensor 1
Transmitter 4 Sensor 2
Transmitter 4 Sensor 3
Transmitter 4 Wireless alarm unit
Transmitter 4 Test button
EN
Colour and flashing pattern
Orange
Green
Yellow
Red
Red
Colour and flashing pattern
Orange
Orange
Orange
Orange
Orange
Green
Green
Green
Green
Green
Yellow
Yellow
Yellow
Yellow
Yellow
Red
Red
Red
Red
Red
Chapter 2
Install pager. 17