Chapter 1 Install Transmitter; Transmitter Overview; Install Sim Card - Abilia All In One User Manual

Transmitter overview

Removable cover
Status indicator
Test button
Battery
compartment
SIM card port
Sensor 1
Power supply
6 Chapter 1 Install transmitter.
Wireless alarm
indicator
GSM indicator
GSM antenna
Sensor 2
Sensor 3

Install SIM card

With a GSM module, you can also receive alarms on a mobile phone, very
practical when you are out of the building. You will need a Micro SIM card
for the transmitter (not a prepaid card). The SIM card shall either have the
PIN set to code '0000' or have no PIN code, see the operator's instructions
to change PIN code.
How to install a SIM card
Note: Disconnect the transmitter from its power supply when installing a SIM card.
1 Attach the GSM antenna and pull out the battery tab on the transmitter.
2 Open the cover and remove the batteries. Insert the SIM card into the
holder in the battery compartment marked with a
symbol indicates card direction.
3 Reinstall the batteries and close the lid. Connect the power cord to the
transmitter and plug into a mains socket.
When the transmitter is connected to the GSM network, the status indicator
light will flash green every 15 seconds. If it does not start flashing green
within 2 minutes, go to Troubleshooting on p. 20.
1
GSM indicator light
The transmitter has an indicator light, showing current GSM status, located inside
the cover and marked with a symbol (see overview on left). This indicates
whether the transmitter is linked to the GSM network and when it is transmitting.
If the indicator is It means that
Flashing every 3 s
• The transmitter is connected to the GSM network.
Constantly lit • The transmitter is texting and calling an assistant.
Flashing every 1 s • The transmitter has lost contact with the GSM network.
Off • The transmitter has no GSM module/ it's out of order.
symbol. The
2 3
Chapter 1 Install transmitter.
EN
7