Pair Wireless Alarm Unit - Abilia All In One User Manual

Pair wireless alarm unit

A wireless alarm unit is often carried on the wrist or around the neck, but also
comes in the form of a wireless door and movement sensor. The wireless alarm
unit needs to be paired to the transmitter before it can work with the system.
Linking a wireless alarm unit
1 Pull out the battery tab to start the transmitter. Connect power cord and
plug into a mains socket.
2 Press and hold the transmitter's test button. Release the button when
the transmitter's status indicator light begins to flash blue.
3 Activate the alarm unit within 10 seconds to pair the units. The transmitter
status indicator light will flash green three times when ready.
Repeat steps 2-3 to link a new alarm unit. Max. 4 units can be linked.
1
Indicator light for wireless alarm unit
There is an indicator under the cover that shows the current alarm status. It
is marked with a symbol (see Overview on p. 6). Here you can see if the
alarm unit is linked and when the transmitter receives an alarm.
If the LED is It means that
Lit / blinks in yellow
• The transmitter is receiving an alarm / heartbeat.
Lit in orange • The transmitter is ready to be connected to the alarm unit.
Off • The transmitter has no wireless alarm module.
• The module is out of order.
Chapter 1 Install transmitter.
10
2 3
Delete wireless alarm units
1 Press and hold the transmitter's test button. Release the button when
the transmitter's status indicator light begins to flash blue.
2 Press the transmitter test button three times in quick succession.
3 The transmitter's status indicator will show that all linked alarm units
have been deleted by flashing green twice.
Note: This action deletes pairings permanently and cannot be cancelled.
1
2
3
x
3
2
x
Chapter 1
Install transmitter. 11
EN