Configuration1 Menu - BenQ SL490 User Manual

Configuration1 menu

Picture
Screen
Audio
PIP
P
Configuration 1
Name
Switch on state
Panel saving
RS232 routing
Boot on source
WOL
Switch on state
Panel saving
RS232 routing
Boot on source
WOL
Power LED light
Configuration1 reset
Factory reset
Select the display status used for the next time you connect the
power cord.
• Power off - The display will remain off when the power cord is
connected to a wall outlet.
• Forced on - The display will turn on when the power cord is
connected to a wall outlet.
• Last status - The display will return to the previous power
status (on/off/standby) when removing and replacing the power
cord.
Choose to enable the panel saving functions and thus reduce the
risk of "image persistence" or "ghost-imaging".
• Brightness - Select On and the image brightness will be
reduced to an appropriate level. The Brightness setting in the
Picture menu will be unavailable when selected.
• Pixel shift - Select the time interval (Auto / 10 ~ 900 Seconds
/ Off) for the display to slightly expand the image size and shift
the position of pixels in four directions (up, down, left, or right).
Select the network control port.
Choose from: RS232 / LAN > RS232.
Choose to select source when boot up.
Input: select input source when bootup.
Playlist: select playlist index for Media player, Browser, PDF
player.
0: no play list. Same as switch source from OSD.1~7: playlist
number.
Choose to turn on or off the wake on LAN function.
Choose from : Off / On
Last status
Action
RS232
Action
Off
On
Action
Action
Description
OSD Menu 65