Black Level; Noise Reduction - BenQ SL490 User Manual

58 OSD Menu

Black level

Tint (Hue)
Color
(Saturation)

Noise Reduction

Gamma selection
Color
temperature
Color control
Picture mode
Overscan
Picture reset
Adjust the image brightness for the background.
sRGB picture mode is standard and cannot be changed.
Adjust the tint of the screen.
YUV signal only.
Adjust the color of the screen.
YUV signal only.
Adjust the noise reduction level.
YUV signal only.
Select a display gamma, It's refer to the brightness performance
curve of signal input.Choose from Native / 2.2 / 2.4.
sRGB picture mode is standard and cannot be changed.
It is used to adjust the color temperature.
The image becomes reddish as the color temperature decreases,
and becomes bluish as the color.
The color levels of red, green, and blue are adjusted by the color
bars.
R: Red gain, G: Green gain, B: Blue gain.
Available when Color Temp. = User1 or User2 only.
PQ setting
PC mode: Standard / Highbright / sRGB.
Video mode: Standard / Highbright / Cinema.
Change the display area of the image.
ON: Set to display area about 95%.
OFF: Set to display area about 100%.
Reset all settings in the Picture menu.
Select "Yes" and press "SET" button to restore to factory preset
data.
Press "EXIT" button to cancel and then return to the previous
menu.