Panasonic E-SERIES Setup Manual page 39

Alarm(from alarm terminal) Setting(2)
39
Enable/Disable alarm out port 1/2
Latch : time to last alarm output signal
(range : 1- 300 sec, default : 10 sec)
Specify channels for sequential display
Enable/ Disable to generate buzzer
Need to uncheck here
to stop buzzer
Specify channels to take snapshot
Duration to ignore new one after alarm occurrence
(range : 5 – 600 sec, default: 5 sec)
Additional time to record video after alarm ends
(range: 10 – 300 sec, default : 10 sec)