Panasonic E-SERIES Setup Manual page 35

35
Enable/Disable alarm out port 1/2
Latch : additional time to last alarm output signal
(range : 1- 300 sec, default : 10 sec)
Specify channels for sequential display
Enable/ Disable to generate buzzer
Need to uncheck here
to stop buzzer
Specify channels to take snapshot
Motion Detect Setting
Additional time to record video after motion detection ends
(range: 10 – 300 sec, default : 10 sec)
Duration to ignore new one after motion detection
(range : 5 – 600 sec, default: 5 sec)