Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for PMK TK100C
Summary of Contents for PMK TK100C
- Page 1 TK100C Probe Calibrator Instruction Manual...
-
Page 2: Warranty
(including damages for loss of profits, loss of business, loss of use or data, interruption of business and the like), even if PMK GmbH has been advised of the possibility of such damages arising from any defect or error in this manual or product. -
Page 3: Safety Symbols
WEEE/ RoHS Directives TK100C (EC conformity marking) This electronic product is classified within the WEEE/ RoHS* category list as monitoring and control equipment (category 9). Category 9 products are exempted from the restrictions under the scope of the RoHS directive. -
Page 4: Safety Information
Safety Information TK100C To avoid personal injury and to prevent fire or damage to this product or products connected to it, review and comply with the following safety precautions. Be aware that if you use this instrument in a manner not specified the protection this product provides may be impaired. -
Page 5: Mode Of Operation
The TK100C facilitates DC, LF and HF adjustment of HV-probes. Mode of operation The function of TK100C can be seen from the circuit principle. A stabilized 100 V DC source loads a 1 uF capacitor. A "none chatter contact" connects the voltage to a RC network of approx. - Page 6 4. Connect the probe to the BNC Output (4) of the TK100C Operation: - By pressing the Mode Button (5) once, the TK100C provides a 100 V square wave signal of 5 ms duration. NOTE: The TK100C is in pulse mode. The Mode Indicator LED (3) blinks.
-
Page 7: Environmental Specifications
Please note, that any previous calibration is invalidated by adjustments you make to this trimmer. Safety Precautions & Override The TK100C has a safety circuit inside, wich enables output voltage only if a BNC Adapter is connected. You can override this safety feature at your own risk following these steps: 1. -
Page 8: Power Supply
Item BNC Adapter 2.5 BNC Adapter 5.0 BNC Adapter 5.0-L BNC Adapter 4 mm Probe-Calibrator TK100C Wall plug transformer Set wall plug transformer primary adapters (EU, US/JP, UK, AUS) Trimmer Tool Instruction Manual...
Need help?
Do you have a question about the TK100C and is the answer not in the manual?
Questions and answers