GE DigitalFlow GF868 Startup Manual page 39

2.6.6a Further Options
After completing the above steps, the meter returns to the
•
To continue programming the meter, refer to the menu maps in Appendix A of the Programming Manual and
navigate to the desired menu. Then, proceed to the appropriate section of the manual for instructions.
•
To leave the User Program and retain the previous settings, press
a 2-channel GF868) and then press
you will be returned to the data display.
•
To leave the User Program and return to measurement mode, press
(for a 2-channel GF868) and then press
into the meter's memory, and you will be returned to the data display.
Note: See the Programming Manual for instructions on using the
Proceed to Chapter 3, Operation, for instructions on taking measurements or refer to the Programming Manual for
instructions on programming the Model GF868's advanced features.
DigitalFlow™ GF868 Startup Guide (1 and 2-Channel)
User (or Channel) PROGRAM
at the SAVE prompt. Any programming changes will be discarded and
[F1] = NO
at the SAVE prompt. Your programming changes will be entered
[F2] = YES
prompt. Continue as follows:
once (for a 1-channel GF868) or twice (for
[EXIT]
[EXIT] once (for a 1-channel GF868) or twice
submenu.
SAVE
Chapter 2. Initial Setup
29