Turn Selfview On And Off; Why Selfview - Cisco DX70 User Manual

Camera Control

Turn Selfview On and Off

D1510418 User Guide
Cisco TelePresence DX70, DX80
Produced: June 2017 for CE9.0
All contents © 2010–2017
Cisco Systems, Inc. All rights reserved.
35

Why Selfview?

Selfview shows what others see from
your video system. You will normally
use it to confirm that they see what
you want them to see.
The selfview appears as a PiP
(Picture-in-Picture).
From time to time you may want to
have the selfview activated during the
meeting. This could, for example, be
to ensure that you remain seen on the
screen.
Tap as shown at left to activate or
deactivate the Selfview.
It may happen that the current position
of the selfview blocks important parts
of the image on your screen. You may
therefore want to move it (see the
next page for more).