Table of Contents
Advertisement
6-2
Power ON / Power OFF / Standby
There is no power button on the Industrial Monitor.
The Monitor will detect the power supply and the video-signal (DVI-D or NY Monitor Link) and then the
status of the Monitor will change accordingly.
Precautions for Safe Use
Do not turn ON the power supply to the product when a part of a human body or a conductive
object is touching the surface of the touchscreen. Doing so will cause the touchscreen function-
ality to be disabled. Remove the conductive object and cycle the power supply to restore the
touchscreen functionality.
Signals, status and operation are provided in the table below.
Item
No Power
Power but no video sig-
nal (DVI-D or NY Moni-
tor Link)
Power and video signal
(DVI-D or NY Monitor
Link)
NY-series Industrial Monitor User's Manual (W554)
Product
Status
Logo LED
OFF
Standby
ON
6 Operating Procedures
LED status
Status LED
6
6 - 3
Advertisement
Table of Contents
