General safety rules an increased risk of electric shock if your body is ground- 5.2 Do not force tool. Use the correct tool for your application. The correct tool will do the job better and 3.4 Don’t expose power tools to rain or wet condi- safer at the rate for which it is designed.
Hilti TE15-C Rotary Hammer Drill Technical data Input power: 710 W Voltage (versions): 120 V Input current: 6.3 A Frequency: 50–60 Hz Speed under load: 0–730/min. Hammering under load: 0–3850 blows/min. Single impact energy: 2.2 Joules / 1.6 ft-lbs. ″–1 ″...
Page 4
This will not increase its performance. Just position the bit and guide it into the hole. Fig. 4: Chisel adjustment Hilti warrants that the tool supplied is free of Press the red lockbutton on the switching defects in material and workmanship. This war- Lubrication of chuck lever.
Need help?
Do you have a question about the TE15-C and is the answer not in the manual?
Questions and answers