Table of Contents
Advertisement
TRANSMITTER
(Transmitter Virtual)
Menu
You can view the status of the transmitter by using the
transmitter virtual menu and displaying metadata received
from the transmitter in the display.
For details on menu operation, see "Basic Menu
Operations" on page 23.
For details on how to change the setting information of the
transmitter, see "Changing the Settings on the
Transmitter" on page 31.
The Sony digital wireless transmitter sends not only digital
audio signals, but also various other information
(metadata) related to transmitter settings.
RF audio signal
Metadata
Wireless remote control
Transmitter settings
Note
"NO DATA" appears when the transmitter is turned off or
located outside the service area. "NO FUNCTION"
appears when the transmitter does not have the metadata
transmission function.
In this section, displayed transmitter settings are
explained.
Display of the Transmitter Name
(NAME)
The name setting of the transmitter is displayed.
Display of the Power Save Setting
(POWER SAVE)
The power save setting of the transmitter is displayed.
Display of the Transmission Power
Setting
(RF POWER)
The transmission power setting of the transmitter from
which transmission is currently being received is
displayed.
Display of Audio Input Level
LEVEL)
The audio input level setting of the transmitter from which
transmission is currently being received is displayed.
Display of the Attenuator
The attenuator setting of the transmitter is displayed.
Display of the Low-cut Filter Setting
(LCF)
The low-cut filter setting of the transmitter is displayed.
Display of the +48 V Power Setting
(+48V)
The +48 V power setting of the transmitter is displayed.
Display of Accumulated Transmitter
Use Time
(TIME)
The accumulated use time of the transmitter is displayed.
Display of Internal Signal Generation
(INTERNAL SG)
Displays whether the transmitter's internal signal is being
generated.
POWER Switch Lock
The POWER switch lock function setting of the
transmitter is displayed.
POWER Switch Status
The POWER switch status of the transmitter is displayed.
26
(INPUT
(ATT)
(PWR SW LOCK)
(PWR SW STATE)
Advertisement
Table of Contents
